Call Us

059 9164564

Combined shed and Office Unit

Home Office with Shed

  • Galvanised Steel Roof
  • Plank Effect (Horizontal sheeting ) steel walls
  • Dividing Steel Partition Wall
  • 1/2 Tilestyle Roof & 1/2 cladded steel roof
  • Flashed Overhang to front 6m Roof.
  • Shed Size 4m x 3m , Office Size 3m x 2m
  • Gutters & Downpipes


  • Size 3m x 2m
  • 25mm Kingspan Insulation
  • Double Hinged Full Glass French Doors
  • Vent


  • Size 3m x 2m
  • Non Drip Coating walls and roof
  • Double Sliding Door
  • 2 Clearlights on roof (back)

Shell Finish

We can supply and install the unit in a “shell” finish , as per spec above. In this case the customer will complete the fit out of the office to include internal wall and roof cladding ( wood panelling or plasterboard finish) and fit electrics as required. Or instead we can also offer this additional work to finish the unit , as below.

Internal Finish of Office and Electrics

  • Tongue & Groove timber finish to 3m x 2m Office
  • Electric Consumer Unit / Fuse Board in Office
  • Qty 4 External Spotlights
  • Qty 4 Internal Spotlights
  • Qty 1 Double Light Switch
  • Qty 4 Double Power Sockets
  • Qty 1 Smoke Alarm

Shed Electrics

  • Surface mounted trunking
  • Qty 1 Double Flourescent Light
  • Qty 1 Double Light Switch
  • Qty 2 Double Power Sockets

As in the case of all Steeltech Shed Units, a concrete base is required. It is necessary to install the base in two steps, whereby a concrete foundation strip (300mm wide) is first installed at the unit’s perimeter. After the Steeltech Unit is erected, the internal floor is installed on a Plastic Sheet DPC. In the case of the Office area , we recommend that insulation is also installed in the concrete base, as this will ensure a greater level of comfort when using during the winter months.

Custom Made to Suit Your Needs

We can make a combination unit to suit your particular requirements.

Call Now Button